Railroad crossing drawing

Talk about signals ranging from wigwags to EVA signals here.

Moderators: Smjh1979, TrainmanKight, mlgillson, PaulSP

Railroad crossing drawing

Postby freebrickproductions » Mon Jul 02, 2012 3:23 pm

Currently a work in progress. Please tell me what you think and suggestions to improve it.
Image
User avatar
freebrickproductions
 
Posts: 274
Joined: Thu Jun 07, 2012 11:12 am

Re: Railroad crossing drawing

Postby MD2020 » Mon Jul 02, 2012 5:19 pm

Gate is on the wrong side of the road, and the stripes are angled incorrectly.
Just the facts, ma'am.
User avatar
MD2020
 
Posts: 187
Joined: Mon Jul 25, 2011 6:01 pm

Re: Railroad crossing drawing

Postby freebrickproductions » Mon Jul 02, 2012 9:15 pm

MD2020 wrote:Gate is on the wrong side of the road, and the stripes are angled incorrectly.

It is on a divided road. I cant really draw a gate on the other side of the road very well.
I will fix the stripes though.
User avatar
freebrickproductions
 
Posts: 274
Joined: Thu Jun 07, 2012 11:12 am

Re: Railroad crossing drawing

Postby MD2020 » Tue Jul 03, 2012 2:18 am

Thats fine, I mean, you asked for comments.

It's ok, just an unusual setup.

Why is there not a gate on the right side? Why is the gate arm hanging out so much when up, and not more straight to 90 degrees?
Just the facts, ma'am.
User avatar
MD2020
 
Posts: 187
Joined: Mon Jul 25, 2011 6:01 pm

Re: Railroad crossing drawing

Postby freebrickproductions » Wed Jul 04, 2012 7:49 am

MD2020 wrote:Why is the gate arm hanging out so much when up, and not more straight to 90 degrees?

I plan on showing it activating. (or if you want, it could be a bad gate mech.)
Either way I fixed the stripes on the gate. Also I redrew the lines in pen and erased all pencil marks.
Image
User avatar
freebrickproductions
 
Posts: 274
Joined: Thu Jun 07, 2012 11:12 am

Re: Railroad crossing drawing

Postby LARDLOGO » Thu Jul 05, 2012 9:43 pm

I made one ages ago
Attachments
RRXING3DPROJECT.png
RRXING3DPROJECT.png (206.07 KiB) Viewed 1171 times
BN lives in Sumas!
User avatar
LARDLOGO
 
Posts: 182
Joined: Thu May 24, 2012 8:51 pm
Location: Sumas, Washington

Re: Railroad crossing drawing

Postby LARDLOGO » Thu Jul 05, 2012 9:44 pm

Sorry, didn't know it would be THAT big :oops:
BN lives in Sumas!
User avatar
LARDLOGO
 
Posts: 182
Joined: Thu May 24, 2012 8:51 pm
Location: Sumas, Washington

Re: Railroad crossing drawing

Postby MD2020 » Fri Jul 06, 2012 2:40 am

Whats up with all the upside down gates? You know thats why the new gate arms are all verticle striped...
Just the facts, ma'am.
User avatar
MD2020
 
Posts: 187
Joined: Mon Jul 25, 2011 6:01 pm

Re: Railroad crossing drawing

Postby LARDLOGO » Fri Jul 06, 2012 8:32 pm

MD2020 wrote:Whats up with all the upside down gates? You know thats why the new gate arms are all verticle striped...



This was done before I was real observant of crossing signals, It was just a placeholder until I could finish the drawing (I have yet to finish it)
BN lives in Sumas!
User avatar
LARDLOGO
 
Posts: 182
Joined: Thu May 24, 2012 8:51 pm
Location: Sumas, Washington

Re: Railroad crossing drawing

Postby illinoistrains » Sun Jul 22, 2012 12:47 pm

You could always take the easy way out and use these pre made signal drawings:
http://trainiax.net/me36-st.php
SUPPORT AMTRAK!
visit my website to see my complete collection of over 1,600 train pictures:
http://cnfan1.rrpicturearchives.net/
User avatar
illinoistrains
 
Posts: 658
Joined: Fri Jan 30, 2009 11:32 pm
Location: Glendale, AZ

Next

Return to Crossing Signal Discussion

Who is online

Users browsing this forum: No registered users and 1 guest