Here's a crossing with a total of three 8" signals with mostly GRS LEX-C 8" plastic lights. When some of the plastic lights break, CP puts up newer 8" lights to replace them, making the crossing look a little weird. One of the replaced lights is a Safetran 8", while the other two are WCH 8" lights. Which ones are which, are unknown to me.

 

There are two mechanical bells, both from WCH.

The relay case, including the DOT number.

A look at one of the signals.

On January 7, 2010, we see some new signals that will be replacing the old 8" gated signals.

On March 16, 2010, we see the signals are in place, although they were installed on January 13, 2010.

In pictures 11 and 12, the frames are 12"x20" Safetran frames with Harmon fading LEDs.

The 12"x24" frames are also from Safetran, but have Dialight/Safetran FLX-4000 ball LEDs. The side lights in pictures 13 and 14 are 12"x20" frames also have Dialight/Safetran FLX-4000 ball LEDs.

There are a total of two WCH type 3 electronic bells. When the new signals went in, the bells rang from startup to when the gates rise. On or before March 1, 2010, the bells were changed back to startup to when the gates fully lowered, as it was back when the old 8" signals existed. As of March 16, 2010, the bells don't even work now! In late March, the bells now ring from startup to shutdown again!