 |
|
     |
 |
      |
   |
Page design created by: [TrainmanKight]; text and other graphics by: [Smjh1979].
1     |
2  |
3  |
The street sign next to the crossing. |
Overview of the crossing. |
|
4   |
5   |
6  |
WCH 1st Generation LEDs. |
A WCH gate mechanism. |
|
7  |
8  |
9  |
10  |
11  |
12  |
13  |
14   |
15  |
This signal has WCH clear LEDs. |
||
16  |
17   |
18   |
19  |
20  |
21  |
The signals start up! In picture 21, the red car you see went through the crossing while the gates were lowering...
The WCH electronic bell on the on the signal with the WCH 1st generation LEDs rings from startup to shutdown, and the other WCH e-bell on the signal with the clear LEDs rings from startup to when the gates fully lower, and again when the gates begin to rise to shutdown due to residential housing close to where that clear LED signal is at. |
||
22  |
23   |
24   |
25   |
||
This close up was taken of the car that went through the crossing. A few seconds after this was taken, this car turned around and questioned TrainmanKight on why he took a picture of them. After telling them why, they seemed to shrug if off and left the scene. |
||
These signals were put up sometime in 2001 after a train derailed, destroying one signal, resulting in both signals coming in.
All pictures were taken on June 16, 2009.