|
     |
 |
       |
   |
Pictures taken by BNSFMan08 on May 23, 2010.
|
1
|
2
|
3
|
4
|
||||
|
The crossing is seen in action, but only because the signals were malfunctioning. One signal has 12"x24" WCH frames, with a WCH electronic bell on top, while the other signal has a General Signals electronic bell on it with Safetran 12"x20" frames. The both gates have a combined total of five Aurora Clear LEDs with one WCH red LED at the tip of the 12"x20" signal. You can see a few of those LEDs have burned out in picture 4.
The LED lights seen in these first 3 pictures are WCH 1st Generation LEDs. |
|||||||
|
5
|
6
|
7
|
8
|
||||
|
Track views with no trains in sight. |
The rear light lit up looks like it is a UP LED? |
The front lights on the 12"x24" signal. These are WCH 1st Gen as well. |
|||||
9
|
10
|
||
A closeup of the WCH e-bell. |
The relay case with some information on it. |
